TEXACO INC -- 00449 TEXACO DIESEL 2  -- 9140-00-286-5296
<pre>=====================  Product Identification  =====================

Product ID:00449 TEXACO DIESEL 2
MSDS Date:04/10/1989
FSC:9140
NIIN:00-286-5296
=== Responsible Party ===
Company Name:TEXACO INC
Box:509
City:BEACON
State:NY
ZIP:12508-0509
Country:US
Info Phone Num:914-838-7204 OR 914-838-7509
Emergency Phone Num:914-831-3400
CAGE:7B131
=== Contractor Identification ===
Company Name:SCHULTE OIL CO
Address:1516 S ROCK ISLAND
Box:188
City:EL RENO
State:OK
ZIP:73036
Country:US
Phone:405-262-3120
CAGE:4R019
Company Name:TEXACO INC
Box:509
City:BEACON
State:NY
ZIP:12508-0509
Country:US
Phone:914-831-3400
CAGE:7B131

=============  Composition/Information on Ingredients  =============

Ingred Name:A COMPLEX MIXTURE OF HYDROCARBONS
Fraction by Wt: 100%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50 (RAT) IS 9.0 ML/KG
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES-BELIEVED TO BE MINIMALLY
    IRRITATING. SKIN-PRIMARY SKIN IRRITANT; EXTREMELY IRRITATING TO
    SKIN WITH BURNS AND BLISTERING POSSIBLE.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:RESPIRATORY SYSTEM-MAY CAUSE SYMPTOMS OF
    DROWSINESS OR NARCOSIS FROM INHALATION OF HIGH VAPOR
    CENCENTRATIONS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES-AS WITH MOST FOREIGN MATERIAL, SHOULD EYE CONTACT OCCUR,
    FLUSH EYES WITH PLENTY OF WATER. SKIN-WASH EXPOSED AREAS WITH SOAP
    & WATER. INGESTION-DO NOT INDUCE VOMITING. ASPIRATION MAY CAUSE
    CHEMICA L PNEUMONIA. INHALATION-SHOULD SYMPTOMSNOTED OCCUR, REMOVE
    TP FRESH AIR. IF NOT BREATHING, APPLY ARTIFICIAL RESPIRATION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:160F,71C
Autoignition Temp:Autoignition Temp Text:500F
Lower Limits:0.52%
Upper Limits:4.10%
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, FOAM OR CARBON
    DIOXIDE. WATER OR FOAM MAY CAUSE FROTHING. USE WATER TO COOL
    CONTAINERS.
Fire Fighting Procedures:IF A LEAK OR SPILL HAS NOT IGNITED, USE WATER
    SPRAY TO DISPERSE THE VAPORS AND TO PROVIDE PROTECTION FOR PERSONS
    ATTEMPTING TO STOP THE LEAK.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID ALL PERSONAL CONTACT. VENTILATE AREA.
    AVOID BREATHING VAPORS. USE SELF-CONTAINED BREATHING APPARATUS OR
    SUPPLIED AIR FOR LARGE SPILLS OR CONFINED AREAS. CONTAIN SPILL IF
    POSSIBLE. WIPE OR ABSORB  ON SUITABLE MATERIAL & SHOVEL UP.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM HEAT AND OPEN FLAME.
    TRANSPORT, HANDLE, AND STORE IN ACCORDANCE WITH OSHA REGULATIONS
    1910.106 & APPLICABLE DOT REGULATIONS.
Other Precautions:NONE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:SUPPLIED AIR RESPIRATORY PROTECTION SHOULD BE
    USED FOR CLEANING LARGE SPILLS OR UPON ENTRY INTO TANKS, VESSELS OR
    OTHER CONFINED SPACES.
Ventilation:NORMAL.
Protective Gloves:GLOVES RESISTANT TO PETROLEUM DISTILLATE
Eye Protection:CHEMICAL TYPE GOGGLES OR FACE SHIELD.
Other Protective Equipment:EXPOSED EMPLOYESS SHOULD EXERCISE REASONABLE
    PERSONAL CLEANLINESS; INCLUDING WASHING EXPOSED SKIN SEVERAL TIMES
    DAILY.
Work Hygienic Practices:LAUNDER OR DRY CLEAN SOILED WORK CLOTHING AT
    LEAST WEEKLY.
Supplemental Safety and Health
USE ONLY AS A FUEL OIL. COMBUSTIBLE.

==================  Physical/Chemical Properties  ==================

HCC:V4
Boiling Pt:B.P. Text:650F,343C
Vapor Pres:LOW
Vapor Density:N.D.
Spec Gravity:0.852
pH:N.A.
Viscosity:3.0 CST
Solubility in Water:NIL.
Appearance and Odor:CLEAR AND BRIGHT LIQUID.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
THIS MATERIAL REACTS VIOLENTLY WITH STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC LEVELS OF CARBON MONOXIDE,
    CARBON DIOXIDE, IRRITATING ALDEHYDES AND KETONES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:RE-EVALUATION OF THE PRODUCT MAY BE REQUIRED BY
    THE USER AT THE TIME OF DISPOSAL, SINCE THE PRODUCT USES,
    TRANSFORMATIONS, MIXTURES & PROCESSES MAY CHANGE CLASSIFICATION TO
    NON-HAZARDOUS OR HAZARDOUS	FOR REASONS OTHER THAN IGNITIBILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.